DeepSpar Current Monitoring Add-on (for DS-4000 or DSI-1000)

DeepSpar Data Recovery Systems
DeepSpar Current Monitoring Add-on (for DS-4000 or DSI-1000)
DeepSpar Current Monitoring Add-on (for DS-4000 or DSI-1000)

Provides DeepSpar with the ability to display the current consumption graph of drives on 5V and 12V lines.

380,00 €
Including VAT. 24.00 %
Delivery time 10 - 20 workdays

Provides DeepSpar with the ability to display the current consumption graph of drives on 5V and 12V lines.

The most common issues that this function identifies are:

  • Power circuit failure, such as a failed fuse or power converter chipset
  • Motor seizure or heads sticking to disk platters, for example, a mechanical issue preventing the drive from spinning up

The function also identifies some other failures, such as a failed motor controller chipset or a failed CPU. However, identifying these failures may require some expertise. You must compare graphs taken from a failed drive with graphs from a good drive of the same family, because the lower level diagnostic is drive-specific.

In general, taking into account the fact that most 3.5” drives consume 5V for CPU and voice coil actuator operation and 12V for motor-related circuitries, it is possible to identify an area of the drive where the problem lies. Since all 2.5” drives consume 5V only, their diagnostic is a bit less functional; however, common issues such as the two failures mentioned above are still easily identified.

http://deepspar.com/current-monitoring-ds-disk-imager.html

Reviews 0 reviews
Compatible products